Spectrofluorimetric determination of butylated hydroxytoluene and butylated hydroxyanisole in their combined formulation: application to butylated hydroxyanisole residual analysis in milk and butter.

Butylated hydroxytoluene (BHT) and butylated hydroxyanisole (BHA) are two antioxidants that have been extensively used in many applications. Both are well known for their debatable health risks due to their multiple intake sources. Therefore, conservative limits are set for them in different regulations adapted to the matrices in which they exist. Here we present a simple spectrofluorimetric method for the determination of BHT and BHA based on their native fluorescence and synchronous scanning mode. The type of solvent and the interval between emission and excitation wavelengths were carefully optimized. Under the optimized conditions, good linearities were obtained between the emission intensity and the corresponding concentrations of BHT and BHA over the range of 3-18 µg/mL and 0.1-7 µg/mL, respectively with a good correlation coefficient (r > 0.99). The limits of detection were 0.9 and 0.02 µg/mL, and the quantification limits were 3 and 0.05 µg/mL for BHT and BHA, respectively. The suggested procedure was validated according to ICH guidelines Q2 (R1). Furthermore, the method's greenness was assessed by three different methods, and it proved to be eco-reasonable. The method was successfully applied to the determination of BHT and BHA in pharmaceutical formulations. We also applied the suggested method for monitoring the residual BHA in conventional, powdered milk and butter, with good recovery in spiked samples.

Development of chromatographic methods to determine multivitamins formulation depending on their solubility and polarity: comparative study using three greenness assessment tools.

High performance liquid chromatography is one of the techniques of choice for the separation and quantitative determination of drugs in mixture form. Ipriflavone, ascorbic acid, pyridoxine, vitamin D3, and lysine are formulated together as an adjuvant combination in osteoporosis. In this work, we developed and validated two complementary high performance liquid chromatographic methods to determine the five compounds in their pharmaceutical dosage form. The first method (method A) was capable of determining ipriflavone, ascorbic acid, pyridoxine, and vitamin D3 in their bulk and combined pharmaceutical formulation. The method is based on Liquid Chromatographic separation with UV detection at 254 nm using Agilent Eclipse XDB-C18 column with a mobile phase consisting of 25 mM ammonium acetate buffer (pH 4.2): methanol in gradient mode. Due to the high polarity of lysine, it was difficult to achieve satisfactory retention on reversed phase columns. So, we separated it on a strong cation exchange column (Exsil 100 SCX) without derivatization with a mobile phase consisting of 10 mM sodium dihydrogen phosphate and 200 mM sodium chloride (pH 6) with UV detection at 210 nm (method B). Validation of the proposed methods was performed according to ICH guidelines Q2(R1). The proposed methods proved to be valid for selective analysis of the stated drugs in their bulk and combined pharmaceutical formulation. Greenness assessment of the developed methods was evaluated using three assessment tools: ESA, GAPI and the most recently developed tool AGREE, showing a satisfactory comprehensive guide of the greenness of the developed methods.

Validated Stability Indicating Chromatographic Methods for Quantification of Imidocarb Dipropionate; Application for the Determination of Its Residues in Bovine Meat and Milk Samples.

BACKGROUND: Imidocarb dipropionate (IMD) is an immunomodulator agent commonly used for treatment of anaplasmosis in cattle. OBJECTIVE: Thus, two sensitive, specific, and precise stability-indicating chromatographic methods have been developed, optimized, and validated for its determination in presence of its acid, alkaline, and oxidative stressed degradation products. METHOD: The first method is based on separation of IMD and its forced induced degradation products on reversed phase cyano column using isocratic elution system consisted of sodium acetate buffer-methanol-acetonitrile (55: 30:15, v/v/v), pH 4.6 at a flow rate of 1.2 mL/min, and UV detection at 254 nm. The second method utilized TLC combined with densitometric determination of the separated bands at 254 nm. The separation was achieved using silica gel 60 F254 TLC plates with a mixture of ethyl acetate-methanol-ammonia-water (8.5:1:0.5:0.2, v/v/v/v) as a developing system. RESULTS: HPLC analysis was applied in range of 0.25-40 µg/mL with LOD of 0.073 µg/mL. While densitometric measurements showed linearity in the range of 0.1-1.8 µg/band with LOD of 0.02 µg/band. CONCLUSIONS: The suggested methods were validated in compliance with the ICH guidelines and were successfully applied for determination of IMD in its commercial veterinary formulations with good recoveries. Furthermore, the proposed HPLC method was extended to the determination of IMD residues in bovine meat and milk samples. HIGHLIGHTS: Bovine meat, HPLC, Imidocarb dipropionate, Milk, TLC.

Validated High Performance Liquid Chromatographic Method for Stability Study of Eptifibatide.

Eptifibatide (EPT) is a cyclic heptapeptide derived from a protein found in the venom of the south-eastern pygmy rattle snake used as an antiplatelet drug. In this study, a newly developed HPLC method demonstrating no interference from the different degradation products of EPT has been optimized and validated. The method was based on HPLC separation of eptifibatide from its degradation products using reversed phase C18 column at ambient temperature with mobile phase consisting of acetonitrile: 50 mM sodium dihydrogen orthophosphate dihydrate, pH was adjusted to 2.2 with orthophosphoric acid (25:75 v/v). Quantitation was achieved with UV detection at 220 nm based on peak area. The proposed method was validated according to the ICH guidelines and applied to evaluate the stability of EPT under different stress conditions including temperature, oxidation and hydrolysis over wide pH range (2-10). Moreover, kinetic study of EPT oxidation and its hydrolysis at pH 10 was demonstrated. The proposed method was successfully applied to quantify EPT in bulk powder and in pharmaceutical formulation with a runtime shorter than all the reported methods.

Spectrofluorimetric determination of eptifibatide in human plasma and dosage form.

A spectrofluorimetric method for the determination of eptifibatide is presented based on its native fluorescence. The type of solvent and the wavelength of maximum excitation and emission were carefully selected to optimize the experimental conditions. Under the specified experimental conditions, the linearities obtained between the emission intensity and the corresponding concentrations of eptifibatide were in the range 0.1-2.5 µg/ml for the calibration curve constructed for direct determination of eptifibatide in dosage form and 0.05-2.2 µg/ml for the calibration curve constructed in spiked human plasma with a good correlation coefficient (r > 0.99). The lower limit of quantification for the calibration curve constructed in human plasma was 0.05 µg/ml. Recovery results for eptifibatide in spiked plasma samples and in dosage form, represented as mean ± % RSD, were 95.17 ± 1.94 and 100.29 ± 1.33 respectively. The suggested procedures were validated according to the International Conference on Harmonization (ICH) guidelines for the direct determination of eptifibatide in its pure form and dosage form and United States Food and Drug Administration (US FDA) Guidance for Industry, Bioanalytical Method Validation for the assay of eptifibatide in human plasma.

Traditional versus advanced chemometric models for the impurity profiling of paracetamol and chlorzoxazone: Application to pure and pharmaceutical dosage forms.

Traditional Partial Least Squares (PLS) and Advanced Artificial Neural Network (ANN) models were applied for the quantitative determination of paracetamol (PAR) and chlorzoxazone (CZX) together with their process-related impurities namely; 4-aminophenol (AP), 4­chloroacetanilide (AC), 4­nitrophenol (NP), 4­chlorophenol (CP) and 2­amino-4-chlorophenol (ACP). Both models were applied first to full spectrum data then the results were compared to those obtained after wavelength selection using Genetic Algorithm (GA). A 5-level 7-factor experimental design was used giving rise to 25 mixtures containing different proportions of the seven compounds. The calibration set was composed of 15 mixtures while 9 mixtures were used in the validation set to test the predictive ability of the suggested models. The four models PLS, ANN, GA-PLS and GA-ANN were successfully applied for the determination of PAR and CZX in their pure and pharmaceutical dosage form. One way ANOVA was carried out between the developed methods and the official ones for PAR and CZX and no significant difference was found. The four models can be easily applied for the determination of the selected drugs in quality control laboratories lacking expensive HPLC instruments.

Validated stability indicating methods for determination of nitazoxanide in presence of its degradation products.

Three sensitive, selective and reproducible stability-indicating methods are presented for determination of nitazoxanide (NTZ), a new anti-protozoal drug, in presence of its degradation products. Method A utilizes the first derivative of ratio spectra spectrophotometry by measurement of the amplitude at 364.4 nm using one of the degradation products as a divisor. Method B is a chemometric-assisted spectrophotometry, where principal component regression (PCR) and partial least squares (PLS) were applied. These two approaches were successfully applied to quantify NTZ in presence of degradation products using the information included in the absorption spectra in the range 260-360 nm. Method C is based on the separation of NTZ from its degradation products followed by densitometric measurement of the bands at 254 nm. The separation was carried out on silica gel 60F254, using chloroform-methanol-ammonia solution-glacial acetic acid (95:5:1:1 by volume, pH=5.80) as a developing system. These methods are suitable as stability-indicating methods for the determination of NTZ in presence of its degradation products either in bulk powder or in pharmaceutical formulations. Statistical analysis of the results has been carried out revealing high accuracy and good precision.